Welcome!

Apache Authors: William Schmarzo, Christopher Harrold, Elizabeth White, Talend Inc., Adrian Bridgwater

Related Topics: @CloudExpo, Java IoT, Microservices Expo, Microsoft Cloud, Containers Expo Blog, Apache

@CloudExpo: Blog Feed Post

Back to Basics: The Theory of (Performance) Relativity

Choice of load balancing algorithms is critical to ensuring consistent and acceptable performance

Choice of load balancing algorithms is critical to ensuring consistent and acceptable performance

One of the primary reasons folks use a Load balancer is scalability with a secondary driver of maintaining performance. We all know the data exists to prove that "seconds matter" and current users of the web have itchy fingers, ready to head for the competition the microsecond they experience any kind of delay.

Similarly, we know that productivity is inherently tied to performance. With more and more critical business functions "webified", the longer it takes to load a page the longer the delay a customer or help desk service representative experiences, reducing the number of calls or customers that can be serviced in any given measurable period.

fastest-is-relative

So performance is paramount, I see no reason to persuade you further to come to that conclusion.

Ensuring performance then is a vital operational directive. One of the ways operations tries to meet that objective is through load balancing. Distributing load ensures available and can be used to offset any latency introduced by increasing capacity (again, I don't think there's anyone who'll argue against the premise that load and performance degradation are inherently tied together).

But just adding a load balancing service isn't enough. The algorithm used to distribute load will invariably impact performance – for better or for worse.

Consider the industry standard "fastest response time" algorithm. This algorithm distributes load based on the historical performance of each instance in the pool (farm). On the surface, this seems like a good choice. After all, what you want is the fastest response time, so why not base load balancing decisions on the metric against which you are going to be measured?

The answer is simple: "fastest" is relative. With very light load on a pool of, say, three servers, "fastest" might mean sub-second responses. But as load increases and performance decreases, "fastest" might start creeping up into the seconds – if not more. Sure, you're still automagically choosing the fastest of the three servers, but "fastest" is absolutely relative to the measurements of all three servers.

Thus, "fastest response time" is probably a poor choice if one of your goals is measured in response time to the ultimate customer – unless you combine it with an upper connection limit.

HOW TO USE "FASTEST RESPONSE TIME" ALGORITHMS CORRECTLY

One of the negatives of adopting a cloud computing paradigm with a nearly religious-like zeal is that you buy into the notion that utilization is the most important metric in the data center. You simply do not want to be wasting CPU cycles, because that means you're inefficient and not leveraging cloud to its fullest potential.

Well, horse-puckey. The reality is that 100% utilization and consistently well-performing applications do not go hand in hand. Period. You can have one, but not the other. You're going to have to choose which is more important a measurement – fast applications or full utilization.

operational axiom 2

In the six years I spent load testing everything from web applications to web application firewalls to load balancers to XML gateways one axiom always, always, remained true:

As load increases performance decreases.

You're welcome to test and retest and retest again to prove that wrong, but good luck. I've never seen performance increase or even stay the same as utilization approaches 100%.

Now, once you accept that reality you can use it to your advantage. You know that performance is going to decrease as load increases, you just don't know at what point the degradation will become unacceptable to your users. So you need to test to find that breaking point. You want to stress the application and measure the degradation, noting the number of concurrent connections at which performance starts to degrade into unacceptable territory. That is your connection limit.

Keep track of that limit (for the application, specifically, because not all applications will have the same limits). When you configure your load balancing service you can now select fastest response time but you also need to input hard connection limits on a per-instance basis. This prevents each instance from passing through the load-performance confluence that causes end-users to start calling up the help desk or sighing "the computer is slow" while on the phone with their customers.

This means testing. Not once, not twice, but at least three runs. Make sure you've found the right load-performance confluence point and write it down. On your hand, in permanent marker.

While cloud computing and virtualization have certainly simplified load balancing services in terms of deployment, it's still up to you to figure out the right settings and configuration options to ensure that your applications are performing with the appropriate levels of "fast".

Read the original blog entry...

More Stories By Lori MacVittie

Lori MacVittie is responsible for education and evangelism of application services available across F5’s entire product suite. Her role includes authorship of technical materials and participation in a number of community-based forums and industry standards organizations, among other efforts. MacVittie has extensive programming experience as an application architect, as well as network and systems development and administration expertise. Prior to joining F5, MacVittie was an award-winning Senior Technology Editor at Network Computing Magazine, where she conducted product research and evaluation focused on integration with application and network architectures, and authored articles on a variety of topics aimed at IT professionals. Her most recent area of focus included SOA-related products and architectures. She holds a B.S. in Information and Computing Science from the University of Wisconsin at Green Bay, and an M.S. in Computer Science from Nova Southeastern University.

@ThingsExpo Stories
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2016 Silicon Valley. The 6thInternet of @ThingsExpo will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Presidio has received the 2015 EMC Partner Services Quality Award from EMC Corporation for achieving outstanding service excellence and customer satisfaction as measured by the EMC Partner Services Quality (PSQ) program. Presidio was also honored as the 2015 EMC Americas Marketing Excellence Partner of the Year and 2015 Mid-Market East Partner of the Year. The EMC PSQ program is a project-specific survey program designed for partners with Service Partner designations to solicit customer feedbac...
The cloud promises new levels of agility and cost-savings for Big Data, data warehousing and analytics. But it’s challenging to understand all the options – from IaaS and PaaS to newer services like HaaS (Hadoop as a Service) and BDaaS (Big Data as a Service). In her session at @BigDataExpo at @ThingsExpo, Hannah Smalltree, a director at Cazena, provided an educational overview of emerging “as-a-service” options for Big Data in the cloud. This is critical background for IT and data profession...
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
Ask someone to architect an Internet of Things (IoT) solution and you are guaranteed to see a reference to the cloud. This would lead you to believe that IoT requires the cloud to exist. However, there are many IoT use cases where the cloud is not feasible or desirable. In his session at @ThingsExpo, Dave McCarthy, Director of Products at Bsquare Corporation, will discuss the strategies that exist to extend intelligence directly to IoT devices and sensors, freeing them from the constraints of ...
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm ...
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...