|By RealWire News Distribution||
|February 4, 2014 07:07 AM EST||
With integrated flatbed models & faster processing speeds
February 4, 2014 - Designed specifically for general office scanning applications where speed, image quality and versatility are required, Kodak Alaris announces today its next generation desktop KODAK i3000 Series Scanners offering increased performance and new models which extend the range to provide both rotary and flatbed scanning in one small integrated unit. Able to scan at up to A3, four models complete the range, the KODAK i3200, i3400, i3250 and i3450 Scanners, packed with features to enhance scanning productivity and efficiency.
With a footprint of just 43cm x 37cm, Kodak i3000 Series Scanners are the most compact low volume production scanners in the Kodak Alaris portfolio designed to quickly help streamline document management processes in paper intensive industries such as healthcare, law, banking and insurance or a variety of paper dependent departments including finance, sales, operations and HR.
New Kodak i3400 scanner speed upgrade adds more value to customers
By optimising the interaction between hardware, firmware and associated drivers, the Kodak i3400 scanning speeds have been increased from 80 to 90 pages per minute at up to 300 dpi, now delivering a recommended daily volume of 20,000 pages.
Hauke Fast, Kodak Alaris' EAMER product marketing manager for document imaging, says, "We're continually looking at how to improve products to add benefit to customers. The speed improvement delivers greater value out of the box, enhances user productivity and makes the i3400 even more cost competitive compared to other products in the low volume production scanning category."
New Kodak i3250 & Kodak i3450 Scanners the most flexible A3 scanners available today with combined rotary and flatbed capability
Using the breakthrough design first seen on the workgroup KODAK i2900 scanner, Kodak Alaris has taken the concept of combining both rotary and integrated A4 flatbed and applied it to its A3 low volume production scanners with the launch of two models, the KODAK i3250 and i3450.
With speeds of up to 50 pages per minute at both 200 and 300 dpi, the duplex Kodak i3250 scanner has recommended daily volume of 15,000 pages a day in rotary mode, and comes with dual LED illumination to ensure quick scanning starts as well as exceptional image clarity and colour stability. Its higher capacity brother, the i3450, offers scanning speeds of up to 90 pages per minute and 20,000 pages per day.
Able to take on virtually any scanning challenge, both models feature an ingenious A4 book-edge flatbed scanner within the unit to allow users to easily scan the entire width of a book page with full clarity, along with magazines, passports and ID cards, torn and stapled documents and so on.
Hauke Fast explains, "The overwhelming feedback from customers is they love the small footprint of a combined all-in-one solution so our product development has very much been driven by our desire to respond to their needs in the low volume scanning segment. And our research shows that when customers actually scan exceptional items, the vast majority are A4 so buying a tethered A3 flatbed is really only for those with truly specific or unusual needs which, of course, we cater for too by offering this accessory as an optional extra."
All KODAK i3000 Series Scanners have a 250-sheet ADF which allows operators to neatly and efficiently scan mixed sized documents in one batch without wasting time continually reloading the hopper. In addition, a selectable rear-exit paper path allows the scanners to cope with thicker documents or items up to 4.1 metres long, perfect for digitising medical paperwork for example. Furthermore, a post scan imprinter is available as an accessory so that documents can be stamped with a customisable reference, date or code once processed.
Professional document capture software offered free of charge
The KODAK i3000 Series Scanners come with the latest Capture Pro Limited Edition imaging software (http://bit.ly/1dL7sFs) bundled free of charge to provide a feature rich easy-to-use batch scanning solution. This includes barcode reading, drag and drop OCR for improved indexing, full text OCR to create searchable PDFs, PDF/A support, batch separation, and direct connectivity into Microsoft SharePoint 2013.
Capture Pro Limited Edition uses the same platform as Capture Pro Software v4.5, Kodak Alaris' latest flagship scanning software suite, which enables customers to easily upgrade to the full version as they wish without having to change the user interface.
Years of Kodak scanner imaging know-how come as standard
All KODAK i3000 Series scanners come with an impressive combination of features including:
Intelligent Document Protection which monitors the condition of paper being scanned, 'listening' for the sound of paper crumpling and stopping the scanner automatically prior to jams occurring so that precious documents aren't damaged;
Perfect Page technology that automatically adjusts images without user involvement to ensure best quality scans every time, especially with mixed and low contrast documents which are difficult to scan;
Smart Touch functionality to start business processes, scan to various predefined locations, all without the need to even open an application on a PC.
Pricing and availability
The KODAK i3000 Series Scanners are available today with a list price of €4,995 for the i3400, €4,095 for the i3250 and €5,595 for the top of the range i3450.
All scanners in the series come with a free three-year advance unit replacement warranty to guarantee performance and availability - unique in the industry for scanners in this segment - to offer total peace of mind for those users where scanning is integral in their electronic workflows.
The KODAK i3000 Series Scanners are compatible with TWAIN, ISIS-based scanning applications and support a range of operating systems including Windows XP, Vista, Windows 7, Windows 8 [32 and 64 bit], as well as Ubuntu [LINUX]. In addition, the scanners are certified for Kofax VRS.
For more information about the new i3000 Series Scanners, please see kodakalaris.com/go/i3000news
 Geographical limitations apply
- ENDS -
About Kodak Alaris
On September 3, 2013, the U.K. Kodak Pension Plan (KPP) completed its acquisition of the Kodak Document Imaging and Personalized Imaging businesses from Eastman Kodak Company and created a new company known as Kodak Alaris. The new company and its name preserve the heritage and legacy of the Kodak brand, while embodying the speed and agility to meet market needs and changes. Kodak Alaris, which is licensed to use the Kodak brand, will focus on strategic, ongoing investments for these businesses to ensure long-term growth and success. The Kodak trademark and trade dress are used under license from Eastman Kodak Company.
About Kodak Alaris' Document Imaging Division
Kodak Alaris' Document Imaging solutions enable customers to capture and consolidate data from digital and paper sources, understand and extract valuable insight from the contents, and deliver the right information to the right people at the right time. Our offerings include award-winning scanners, capture and information management software, an expanding range of professional services and industry-leading service and support. With customers ranging from small offices to global operations, Kodak Alaris delivers superior systems and solutions to automate business processes, enhance customer interactions and enable better business decisions.
Kodak Alaris EAMER PR lead
+44 (0)7768 145571
+44(0)207 274 9937
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
Jul. 1, 2016 04:15 PM EDT Reads: 176
Ask someone to architect an Internet of Things (IoT) solution and you are guaranteed to see a reference to the cloud. This would lead you to believe that IoT requires the cloud to exist. However, there are many IoT use cases where the cloud is not feasible or desirable. In his session at @ThingsExpo, Dave McCarthy, Director of Products at Bsquare Corporation, will discuss the strategies that exist to extend intelligence directly to IoT devices and sensors, freeing them from the constraints of ...
Jul. 1, 2016 03:15 PM EDT Reads: 273
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
Jul. 1, 2016 02:00 PM EDT Reads: 1,409
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
Jul. 1, 2016 01:15 PM EDT Reads: 296
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm ...
Jul. 1, 2016 01:00 PM EDT Reads: 681
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Jul. 1, 2016 01:00 PM EDT Reads: 1,031
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
Jul. 1, 2016 12:30 PM EDT Reads: 679
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
Jul. 1, 2016 12:00 PM EDT Reads: 645
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Jul. 1, 2016 10:45 AM EDT Reads: 556
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
Jul. 1, 2016 10:30 AM EDT Reads: 1,078
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
Jul. 1, 2016 10:00 AM EDT Reads: 512
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
Jul. 1, 2016 09:30 AM EDT Reads: 1,184
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
Jul. 1, 2016 09:00 AM EDT Reads: 680
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Jul. 1, 2016 08:45 AM EDT Reads: 798
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
Jul. 1, 2016 08:30 AM EDT Reads: 795
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
Jul. 1, 2016 08:00 AM EDT Reads: 562
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
Jul. 1, 2016 08:00 AM EDT Reads: 595
A strange thing is happening along the way to the Internet of Things, namely far too many devices to work with and manage. It has become clear that we'll need much higher efficiency user experiences that can allow us to more easily and scalably work with the thousands of devices that will soon be in each of our lives. Enter the conversational interface revolution, combining bots we can literally talk with, gesture to, and even direct with our thoughts, with embedded artificial intelligence, wh...
Jul. 1, 2016 07:15 AM EDT Reads: 1,328
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 1, 2016 07:15 AM EDT Reads: 739
"We work in the area of Big Data analytics and Big Data analytics is a very crowded space - you have Hadoop, ETL, warehousing, visualization and there's a lot of effort trying to get these tools to talk to each other," explained Mukund Deshpande, head of the Analytics practice at Accelerite, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 1, 2016 12:30 AM EDT Reads: 782