|By Marketwired .||
|June 23, 2014 08:01 AM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/23/14 -- Barisan Gold Corporation (TSX VENTURE: BG) is pleased to announce the first tranche of assay results for hole UTD-008 at its Upper Tengkereng gold-copper porphyry discovery, located in the Province of Aceh, Indonesia.
Assays have been received from the first 400 metres of hole UTD-008. Hole UTD-008 is being drilled parallel to UTD-002 but in an opposite direction, scissor crossing that hole, with the objective of expanding and further defining the second high grade zone discovered in holes UTD-002 and UTD-006. UTD-008 is mineralized 4 metres from surface. From 296 to 400 metres, UTD-008 returned 104 metres of 0.7 g/t gold + 1.0% copper (1.4% copper equivalent at current market prices) within a wider intercept of 212 metres of 0.6 g/t gold + 0.8% copper (1.1% copper equivalent at current market prices). The high-grade mineralization remains open down hole at a depth below 400 metres.
---------------------------------------------------------------------------- From To Intercept Gold Copper Gold Eq. Copper Eq. (m) (m) (m) (g/t) (%) (g.t) (%) ---------------------------------------------------------------------------- 4 400 396 0.42 0.56 1.4 0.9 ---------------------------------------------------------------------------- Incl. 188 400 212 0.57 0.75 1.8 1.1 ---------------------------------------------------------------------------- Incl. 226 400 174 0.61 0.82 2.0 1.2 ---------------------------------------------------------------------------- Incl. 296 400 104 0.74 0.95 2.3 1.4 ----------------------------------------------------------------------------
Copper Eq. & Gold Eq. calculated using current market prices. No adjustments have been made for metallurgical recovery as these remain uncertain at this time.
Hole UTD-008, as a whole, is the highest-grade hole drilled so far at Upper Tengkereng averaging 0.9% copper equivalent over its entire length to-date and returning the first 100-metre long intercept of greater than 1% copper assays. In addition to further validating the second high-grade zone initially discovered in holes UTD-002 and UTD-006, UTD-008 has extended the high-grade zone further to the south by over 50 metres and further at depth by another 50 metres. The high-grade zone is not limited to the first 400 metres with indications it continues below that level.
This second high-grade zone, returning mineralization above 1.0% copper equivalent, now covers an area of 100m x 100m at surface based on the three holes drilled to-date and is open in all directions. Further drilling in that area will seek to identify the width of the high-grade zone on a north-south axis as all three holes so far have been drilled on an east-west axis.
"Drilling at Upper Tengkereng continues to return outstanding copper and gold mineralization", said Alex Granger, Chief Executive Officer of Barisan Gold. "UTD-008 has not only returned the highest grade intercept so far drilled at Upper Tengkereng but has also done so in a zone that sits very close to surface, reinforcing the economic potential of the deposit. The first high-grade zone discovered at Upper Tengkereng seems to start 400-500 metres below surface. This second high-grade zone starts within 150 metres from surface with significant economic grades in the mineralization above it. Upper Tengkereng continues to prove itself as a world-class discovery and, to-date, demonstrates the possibility that the high-grade Upper Tengkereng discovery and associated porphyry-style mineralization may develop into a meaningful copper-gold deposit."
An updated investor presentation can be found on the Barisan Gold website, where the tables and maps have been updated to show the location and grade distribution of this newly validated high-grade zone.
Drilling continues at Upper Tengkereng despite minor technical issues at both UTD-007 and UTD-008 that impacted drilling over the past couple of weeks.
Drilling at UTD-007 was interrupted for one week in early June due to technical issues with the rig. Since June 15, 2014, drilling is back to normal and as of June 21, 2014 drilling had reached 773 metres in length. UTD-007 is testing the depths of the first high-grade zone discovered in the eastern part of the deposit.
Drilling at UTD-008 was interrupted for a 10-day period in early June due to technical issues with the rig. Since June 17, 2014, drilling is back to normal and as of June 21, 2014, drilling had reached 640 metres in length. Visual interpretation indicates that the high-grade zone continues at depth below 400 metres.
Barisan Gold retained the laboratory services of PT Intertek Utama Services of Jakarta, Indonesia, which, in the case of UTD-008, employed the fire assay method (FA50) on gold samples and for other precious and base metal analyses, ICP with multi acid digestion.
Dibiansyah Hamid, MAIG, the designated QP within the meaning of NI 43-101, has reviewed and approved the content of this release.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
To receive or stop receiving BG news via email, please email [email protected] and state your preference in the subject line.
About Barisan Gold Corporation
Barisan Gold (TSX VENTURE: BG) is a Canadian-based minerals exploration company listed on the TSX Venture Exchange under the symbol "BG". The Company is engaged in the exploration, acquisition and development of mineral properties in Indonesia. Barisan Gold currently owns and operates two gold and gold-copper properties in Indonesia's Aceh Province on the northern tip of Sumatra Island, namely the Barisan gold-copper porphyry belt and the Abong epithermal gold project. Barisan Gold currently has 40,721,186 shares outstanding.
Caution Regarding Forward-Looking Statements
Certain statements in this News Release, which are not historical in nature, constitute "forward looking statements" within the meaning of that phrase under applicable Canadian securities law. These statements include, but are not limited to, statements or information concerning future work programs at the Company's Upper Tengkereng Porphyry prospect, results and timing of any work programs, the Company's performance or events as of the date hereof. These statements reflect management's current assumptions and expectations and by their nature are subject to certain underlying assumptions, known and unknown risks and uncertainties and other factors which may cause actual results, performance or events to be materially different from those expressed or implied by such forward looking statements. Those risks include the interpretation of drill results; the geology, grade and continuity of mineral deposits; the possibility that future exploration, development or mining results will not be consistent with our expectations; commodity and currency price fluctuation; failure to obtain adequate financing; regulatory, recovery rates, refinery costs, and other relevant conversion factors, permitting and licensing risks; and general market and mining exploration risks. Forward-looking statements should not be construed as investment advice. Readers should perform a detailed, independent investigation and analysis of the Company and are encouraged to seek independent professional advice before making any investment decision. Accordingly, readers should not place undue reliance on any forward-looking statement. Except as required by applicable securities laws, the Company disclaims any obligation to update or revise any forward looking statements to reflect events or changes in circumstances that occur after the date hereof.
Big Data, cloud, analytics, contextual information, wearable tech, sensors, mobility, and WebRTC: together, these advances have created a perfect storm of technologies that are disrupting and transforming classic communications models and ecosystems. In his session at @ThingsExpo, Erik Perotti, Senior Manager of New Ventures on Plantronics’ Innovation team, provided an overview of this technological shift, including associated business and consumer communications impacts, and opportunities it m...
Jan. 21, 2017 02:00 AM EST Reads: 5,811
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, discussed how leveraging the Industrial Internet and...
Jan. 21, 2017 01:30 AM EST Reads: 6,564
Fact is, enterprises have significant legacy voice infrastructure that’s costly to replace with pure IP solutions. How can we bring this analog infrastructure into our shiny new cloud applications? There are proven methods to bind both legacy voice applications and traditional PSTN audio into cloud-based applications and services at a carrier scale. Some of the most successful implementations leverage WebRTC, WebSockets, SIP and other open source technologies. In his session at @ThingsExpo, Da...
Jan. 21, 2017 01:15 AM EST Reads: 2,883
"Tintri was started in 2008 with the express purpose of building a storage appliance that is ideal for virtualized environments. We support a lot of different hypervisor platforms from VMware to OpenStack to Hyper-V," explained Dan Florea, Director of Product Management at Tintri, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jan. 21, 2017 01:15 AM EST Reads: 4,892
There will be new vendors providing applications, middleware, and connected devices to support the thriving IoT ecosystem. This essentially means that electronic device manufacturers will also be in the software business. Many will be new to building embedded software or robust software. This creates an increased importance on software quality, particularly within the Industrial Internet of Things where business-critical applications are becoming dependent on products controlled by software. Qua...
Jan. 21, 2017 01:15 AM EST Reads: 5,041
A critical component of any IoT project is what to do with all the data being generated. This data needs to be captured, processed, structured, and stored in a way to facilitate different kinds of queries. Traditional data warehouse and analytical systems are mature technologies that can be used to handle certain kinds of queries, but they are not always well suited to many problems, particularly when there is a need for real-time insights.
Jan. 21, 2017 12:15 AM EST Reads: 6,374
In his General Session at 16th Cloud Expo, David Shacochis, host of The Hybrid IT Files podcast and Vice President at CenturyLink, investigated three key trends of the “gigabit economy" though the story of a Fortune 500 communications company in transformation. Narrating how multi-modal hybrid IT, service automation, and agile delivery all intersect, he will cover the role of storytelling and empathy in achieving strategic alignment between the enterprise and its information technology.
Jan. 21, 2017 12:00 AM EST Reads: 4,704
IoT is at the core or many Digital Transformation initiatives with the goal of re-inventing a company's business model. We all agree that collecting relevant IoT data will result in massive amounts of data needing to be stored. However, with the rapid development of IoT devices and ongoing business model transformation, we are not able to predict the volume and growth of IoT data. And with the lack of IoT history, traditional methods of IT and infrastructure planning based on the past do not app...
Jan. 20, 2017 10:45 PM EST Reads: 917
WebRTC is bringing significant change to the communications landscape that will bridge the worlds of web and telephony, making the Internet the new standard for communications. Cloud9 took the road less traveled and used WebRTC to create a downloadable enterprise-grade communications platform that is changing the communication dynamic in the financial sector. In his session at @ThingsExpo, Leo Papadopoulos, CTO of Cloud9, discussed the importance of WebRTC and how it enables companies to focus o...
Jan. 20, 2017 08:45 PM EST Reads: 4,383
The Internet of Things can drive efficiency for airlines and airports. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Sudip Majumder, senior director of development at Oracle, discussed the technical details of the connected airline baggage and related social media solutions. These IoT applications will enhance travelers' journey experience and drive efficiency for the airlines and the airports.
Jan. 20, 2017 05:45 PM EST Reads: 2,102
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo 2016 in New York. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place June 6-8, 2017, at the Javits Center in New York City, New York, is co-located with 20th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry p...
Jan. 20, 2017 05:15 PM EST Reads: 3,825
"LinearHub provides smart video conferencing, which is the Roundee service, and we archive all the video conferences and we also provide the transcript," stated Sunghyuk Kim, CEO of LinearHub, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Jan. 20, 2017 03:00 PM EST Reads: 1,661
Things are changing so quickly in IoT that it would take a wizard to predict which ecosystem will gain the most traction. In order for IoT to reach its potential, smart devices must be able to work together. Today, there are a slew of interoperability standards being promoted by big names to make this happen: HomeKit, Brillo and Alljoyn. In his session at @ThingsExpo, Adam Justice, vice president and general manager of Grid Connect, will review what happens when smart devices don’t work togethe...
Jan. 20, 2017 02:15 PM EST Reads: 640
The 20th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held June 6-8, 2017, at the Javits Center in New York City, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Containers, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal ...
Jan. 20, 2017 01:30 PM EST Reads: 5,252
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
Jan. 20, 2017 01:30 PM EST Reads: 5,747
20th Cloud Expo, taking place June 6-8, 2017, at the Javits Center in New York City, NY, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy.
Jan. 20, 2017 12:30 PM EST Reads: 4,358
WebRTC is the future of browser-to-browser communications, and continues to make inroads into the traditional, difficult, plug-in web communications world. The 6th WebRTC Summit continues our tradition of delivering the latest and greatest presentations within the world of WebRTC. Topics include voice calling, video chat, P2P file sharing, and use cases that have already leveraged the power and convenience of WebRTC.
Jan. 20, 2017 12:30 PM EST Reads: 3,201
Discover top technologies and tools all under one roof at April 24–28, 2017, at the Westin San Diego in San Diego, CA. Explore the Mobile Dev + Test and IoT Dev + Test Expo and enjoy all of these unique opportunities: The latest solutions, technologies, and tools in mobile or IoT software development and testing. Meet one-on-one with representatives from some of today's most innovative organizations
Jan. 20, 2017 12:30 PM EST Reads: 1,665
SYS-CON Events announced today that Super Micro Computer, Inc., a global leader in Embedded and IoT solutions, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 7-9, 2017, at the Javits Center in New York City, NY. Supermicro (NASDAQ: SMCI), the leading innovator in high-performance, high-efficiency server technology, is a premier provider of advanced server Building Block Solutions® for Data Center, Cloud Computing, Enterprise IT, Hadoop/Big Data, HPC and E...
Jan. 20, 2017 12:15 PM EST Reads: 5,845
Internet of @ThingsExpo, taking place June 6-8, 2017 at the Javits Center in New York City, New York, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @ThingsExpo New York Call for Papers is now open.
Jan. 20, 2017 10:45 AM EST Reads: 3,718