|By PR Newswire||
|August 21, 2014 08:42 PM EDT||
MOUNTAIN VIEW, Calif., Aug. 21, 2014 /PRNewswire/ -- Diamond Systems, a leading global supplier of compact, rugged, embedded computing solutions for real-world applications in a broad range of markets, today introduced Emerald-MM-8EL-XT (EMM-8EL-XT), a family of high performance PCIe/104 OneBankTM serial I/O modules offering 4 or 8 serial ports with software-controlled configuration and optional opto-isolation.
The serial ports are based on a high speed PCIe octal UART with 256-byte TX/RX FIFOs and auto RS-485 transmit control. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Each port is independently isolated with an isolated power + signal chip, plus additional isolators for control signals. The board features intelligent power management that limits inrush current on power-up and also enables power-down of unused serial ports for power savings.
Opto-isolated models feature independent 2500V isolation circuits for enhanced reliability in vehicle or long cable applications. All ports also feature +/-15KV ESD protection. Each serial port is available on an independent latching connector for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMM-8EL-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs.
EMM-8EL-XT also offers 8 digital/analog I/O lines which are programmable from the on-board microcontroller. Each I/O line can be configured for digital input or output. Seven of the I/O lines can also be configured for 12-bit A/D input with selectable 0-2.048V or 0-3.3V input ranges.
EMM-8EL-XT contains no configuration jumpers; all configuration and control is done with an onboard microcontroller. All configuration settings are stored in the microcontroller's flash memory and are automatically loaded on power-up. The microcontroller is managed with a comprehensive software suite that makes configuring the EMM-8EL-XT fast and simple. A graphical control panel, a console application, and drivers for Windows and Linux are provided to enable convenient configuration of the board and control of the I/O features in a laboratory or system assembly environment, or embedded in the customer's application software.
EMM-8EL-XT is compatible with Windows 7/Vista/2000/XP and Linux and is qualified for operation over the full industrial temperature range of -40oC to +85oC.
EMM-8EL-XT's key features and functions are tabulated below.
Key Features and Functions
- 8 serial ports with up to 10Mbps data rates
- 16550 compatible octal UART with 256-byte TX/RX FIFOs
- Models available with or without opto-isolation
- 8 programmable digital I/O or analog input lines
- On-board microcontroller manages and stores configuration settings
- All configuration done via software; no jumpers
- Comprehensive software suite enables easy configuration and control
- Latching connectors for increased ruggedness
- PCIe x1 host interface using PCIe/104 "OneBankTM" connector
- Rugged design: -40oC to +85oC operating temperature
- Support for Windows Embedded Standard 7, XP, Vista, 2000 and Linux 2.6.xx
- PCIe/104 form-factor: 3.55" x 3.775" (90mm x 96mm)
Pricing and Availability
The Emerald-MM-8EL-XT PCIe/104 serial module family is available immediately. See the table below for specific model information. Single unit pricing starts at US$675 for the EMM-8EL-XT model.
8-port PCIe/104 Serial Module with opto-isolation
4-port PCIe/104 Serial Module with opto-isolation
8-port PCIe/104 Serial Module, no opto-isolation
8-port PCIe/104 Serial Module, no opto-isolation
About Diamond Systems
Founded in 1989 and based in Mountain View, California, Diamond Systems Corporation is a leading global provider of compact, rugged, board- and system-level real world embedded computing solutions to companies in a broad range of markets, including transportation, energy, aerospace, defense, manufacturing, medical, and research. The company is renowned as an innovator of embedded I/O standards and technologies; it originated the FeaturePak I/O modules standard, was an early adopter of PC/104 module technology, and holds a patent for a unique analog I/O autocalibration technique.
Diamond's extensive product line includes compact, highly integrated single-board computers (SBCs); an extensive line of expansion modules for analog and digital I/O, wired and wireless communications, GPS, solid-state disk, and power supply functions; and complete system-level solutions. In support of performance-critical embedded application requirements, these products are engineered to operate reliably over wide operating temperature ranges, such as –40°C to +85°C, and at high levels of shock and vibration. Additionally, the company offers a comprehensive hardware, software, and system integration and customization services.
For further information, please visit www.diamondsystems.com or call +1-800-367-2104.
DIAMOND SYSTEMS MEDIA CONTACT:
Director of Marketing
Copyright ©2014 Diamond Systems Corp. All rights reserved. The Diamond System logo is a trademark of Diamond Systems Corp. All other company and product names mentioned herein may be trademarks of their respective companies.
SOURCE Diamond Systems
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm ...
Jun. 29, 2016 07:00 PM EDT Reads: 462
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
Jun. 29, 2016 05:30 PM EDT Reads: 1,037
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
Jun. 29, 2016 04:15 PM EDT Reads: 447
"We work in the area of Big Data analytics and Big Data analytics is a very crowded space - you have Hadoop, ETL, warehousing, visualization and there's a lot of effort trying to get these tools to talk to each other," explained Mukund Deshpande, head of the Analytics practice at Accelerite, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jun. 29, 2016 04:15 PM EDT Reads: 424
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
Jun. 29, 2016 04:00 PM EDT Reads: 381
UAS, drones or unmanned aircraft, no matter what you call them — this was their week. Our news stream was flooded with updates on the newly announced rules and regulations for commercial UAS from the FAA. So, naturally we have dedicated this week’s top news round up to highlight some of our favorite UAS stories.
Jun. 29, 2016 03:02 PM EDT Reads: 289
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2016 Silicon Valley. The 6thInternet of @ThingsExpo will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Jun. 29, 2016 03:00 PM EDT Reads: 377
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
Jun. 29, 2016 02:00 PM EDT Reads: 401
Basho Technologies has announced the latest release of Basho Riak TS, version 1.3. Riak TS is an enterprise-grade NoSQL database optimized for Internet of Things (IoT). The open source version enables developers to download the software for free and use it in production as well as make contributions to the code and develop applications around Riak TS. Enhancements to Riak TS make it quick, easy and cost-effective to spin up an instance to test new ideas and build IoT applications. In addition to...
Jun. 29, 2016 02:00 PM EDT Reads: 668
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Jun. 29, 2016 01:15 PM EDT Reads: 366
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
Jun. 29, 2016 12:30 PM EDT Reads: 565
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
Jun. 29, 2016 11:00 AM EDT Reads: 534
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
Jun. 29, 2016 11:00 AM EDT Reads: 500
Presidio has received the 2015 EMC Partner Services Quality Award from EMC Corporation for achieving outstanding service excellence and customer satisfaction as measured by the EMC Partner Services Quality (PSQ) program. Presidio was also honored as the 2015 EMC Americas Marketing Excellence Partner of the Year and 2015 Mid-Market East Partner of the Year. The EMC PSQ program is a project-specific survey program designed for partners with Service Partner designations to solicit customer feedbac...
Jun. 29, 2016 11:00 AM EDT Reads: 601
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Jun. 29, 2016 10:45 AM EDT Reads: 568
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jun. 29, 2016 10:30 AM EDT Reads: 520
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.
Jun. 29, 2016 10:00 AM EDT Reads: 1,307
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
Jun. 29, 2016 09:45 AM EDT Reads: 1,275
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
Jun. 29, 2016 09:45 AM EDT Reads: 961
In his keynote at 18th Cloud Expo, Andrew Keys, Co-Founder of ConsenSys Enterprise, provided an overview of the evolution of the Internet and the Database and the future of their combination – the Blockchain. Andrew Keys is Co-Founder of ConsenSys Enterprise. He comes to ConsenSys Enterprise with capital markets, technology and entrepreneurial experience. Previously, he worked for UBS investment bank in equities analysis. Later, he was responsible for the creation and distribution of life sett...
Jun. 29, 2016 09:15 AM EDT Reads: 1,468